Wallpaper Help & Information
Your central hub for all wallpaper guides, instructions, and FAQs. Choose a topic below to find what you need.
Peel-and-Stick Wallpaper
Non-Pasted Wallpaper
Measuring & Calculator
Shipping & Policies
Peel-and-Stick Materials & Safety
Peel & stick wallpaper is an easy-application material with a built-in adhesive backing. There’s no soaking and no additional glue. Simply peel away the liner and apply directly to the wall.
Our peel & stick wallpaper is made from 100% woven fully-recyclable polyester fabric (PET) with a textured surface. It contains no PVC, no PFASs, no MOSH or MOAH, and is printed with UV, GreenGuard-certified inks that are vivid, durable, and environmentally responsible.
The material is self-adhesive, splash-proof, and can be repositioned for up to 24 hours after installation. It performs beautifully on smooth or lightly textured walls, but should not be used in high-humidity spaces or on surfaces that trap moisture.
It also complies with REACH and RoHS safety standards, offering a calm balance of sustainability, performance, and long-lasting colour.
Wall Preparation Guide
How to prepare your walls for a smooth and lasting peel-and-stick installation.
Open Preparation Guide →
Installation Guide
Step-by-step instructions for installing peel-and-stick wallpaper, including tips for alignment and smoothing.
Open Installation Guide →
Care Guide
Daily Care:
A soft touch is enough.
Use a clean microfiber cloth to dust the surface. Avoid abrasives or scrubbing — the finish is designed to wipe clean with minimal effort.
Spot cleaning.
For marks, a lightly damp cloth works well. A gentle soap solution may be used sparingly. Wipe softly and allow the surface to dry.
Keep edges calm.
If a corner begins to lift, smooth it back with your palm. Warmth from your hand helps the adhesive restick.
In Humid or Busy Spaces:
Our peel-and-stick wallpaper is resilient, but all adhesives appreciate steady conditions.
Bathrooms & laundry rooms:
Use ventilation during showers and allow steam to clear before closing the door. This helps the panels stay smooth.
High-traffic rooms:
Where little hands or daily wear are expected, a soft wipe now and then keeps the texture bright.
Protecting the Surface:
Avoid harsh chemicals.
Bleach, alcohol, strong cleaners, and textured sponges can dull or damage the print.
Keep heat away.
Do not place wallpaper directly behind stoves or on surfaces exposed to high heat.
Mind the moisture.
Large, persistent drips or wet cloths left against the paper may affect adhesion over time.
Long-Term Care:
Let the wallpaper breathe.
Dust gently every few weeks. This keeps the surface feeling clean and resets the room visually.
Check the seams.
Light pressure along the edges once in a while helps everything stay in place, especially near vents or windows.
Removal Guide
How to remove peel-and-stick wallpaper cleanly and safely without damaging walls.
Open Removal Guide →
Materials & Safety
Our non-pasted wallpaper is a traditional, paste-applied paper material designed for a refined, long-lasting finish. It installs with a high-quality, clear adhesive applied directly to the wall, allowing each panel to sit smooth and true.
The paper is made from a premium, FSC-certified non-woven substrate with a soft matte surface. It contains no PVC, no PFASs, no MOSH or MOAH, and is printed with UV, GreenGuard-certified inks that offer vivid colour, durability, and thoughtful environmental performance.
Unlike many non-wovens, this material is non-breathable. This gives it excellent stability and a beautifully even finish, but it should be installed only on fully dry, well-primed walls — never on surfaces that may trap moisture. Avoid persistent humidity, active steam, or direct water exposure.
Our non-pasted wallpaper meets EN 13501-1, Class C fire performance requirements and is tear-resistant, dimensionally stable, and designed for clean removal with the use of water or a wallpaper-safe removal solution.
The material complies with REACH and RoHS safety standards, offering a calm balance of craftsmanship, safety, and long-lasting colour.
Preparation Guide
How to prepare your walls for clean, long-lasting non-pasted wallpaper installation.
Open Preparation Guide →
Installation Guide
Full installation instructions for traditional non-pasted wallpaper, including paste-the-wall steps.
Open Installation Guide →
Care Guide
Daily Care
A soft, dry cloth is perfect.
Dust occasionally with a microfiber cloth to keep the surface clean and bright.
Spot cleaning.
For light marks, use a barely-damp cloth and gentle pressure.
Avoid soaking the paper — too much water can affect the fibers and the paste beneath.
No abrasives.
Keep sponges, scrubbing pads, and strong cleaners away from the surface. The finish is designed to be naturally low-maintenance.
Caring for High-Use Rooms
Hallways, living spaces, children’s rooms:
A soft wipe now and then keeps the texture fresh.
Bathrooms:
Non-pasted wallpaper prefers low moisture. Ensure good ventilation, especially after showers. Avoid direct water contact.
Protecting the Paper
Avoid harsh chemicals.
Bleach, alcohol, and solvent-based cleaners can mark or dull the print.
Mind the heat.
Do not install directly behind stoves or in areas with open flame or high radiant heat.
Keep edges clear.
If the room experiences humidity shifts, run a light, dry hand along seams occasionally to help them stay neat.
Long-Term Care
Let it breathe.
Wallpaper settles beautifully over time. A gentle dusting every few weeks is enough.
Address small lifts early.
If you notice an edge lifting, apply a small amount of clear wallpaper adhesive and smooth gently with a clean cloth.
Removal Guide
How to safely remove non-pasted wallpaper using warm water and gentle techniques.
Open Removal Guide →
Measuring Guide
A simple guide to help you measure with confidence and choose the right number of panels for your space.
1. Measure Your Wall Width
Use a tape measure to find the full width of the wall from edge to edge.
- Measure at the top, middle, and bottom
- Note the widest number
- This ensures a calm, accurate fit
All Huggleberry Hill panels are 30 inches wide, so this measurement tells you how many panels you will need.
2. Measure Your Wall Height
Measure from the top of the skirting/baseboard to the ceiling or crown.
- Again, measure in a few places
- Choose the tallest point to ensure full coverage
- Add 1–2 inches of trimming allowance
Our panel lengths are 4 ft, 8 ft, 9 ft, 10 ft, and 12 ft.
Choose the panel length closest to (or slightly longer than) your wall height.
3. Consider Doors, Windows, and Sloped Ceilings
You can ignore doors and windows when calculating panel quantity — the pattern still needs to flow across the full width of the wall.
For sloped ceilings or unusual shapes, measure the tallest and widest points.
Excess can be trimmed during installation.
4. Understanding Pattern Repeats
Each Huggleberry Hill design has a defined vertical repeat.
This ensures that when your 30-inch panels are placed side by side, the artwork aligns softly and naturally.
No special calculations are needed — the repeat is already engineered into the panel design.
5. Order a Little Extra (Just in Case)
For complex spaces, alcoves, or first-time installers, ordering one spare panel can offer peace of mind.
It ensures you have enough material if a seam needs adjusting.
6. Use Our Wallpaper Calculator
For a calm, precise estimate based on your own measurements, enter your wall dimensions here:
Wallpaper Calculator
Quickly determine how many panels your project requires.
Open Wallpaper Calculator →
Panel Sizing Explained
A gentle guide to how Huggleberry Hill panels fit and flow in your home.
Panel Widths
All of our wallpapers — peel & stick and non-pasted — are printed in 30-inch wide panels.
This wide format creates fewer seams, smoother installation, and a quiet, uninterrupted flow of pattern.
Panel Lengths
To suit a range of ceiling heights, each design is offered in lengths of:
4 ft, 8 ft, 9 ft, 10 ft, and 12 ft
Choose the length closest to your wall height. Panels can be trimmed at the top and bottom for a tailored, precise finish.
Pattern Repeats
Every design has a measured vertical repeat — the distance before the pattern begins again.
Panels are engineered so the pattern aligns cleanly from one panel to the next, creating a continuous, seamless look across your wall.
How It Comes Together
Think of each 30-inch panel as a tall, repeating artwork.
When placed side by side:
- The pattern meets at the edges with intentional continuity
- Seams stay subtle
- The design flows softly across the room
Once you know your wall width and height, simply choose the correct panel length and order the number of 30-inch panels needed to span your space. Use our Wallpaper Calculator to confirm your measurements and math.
Ordering & Delivery
Each wallpaper order is printed especially for you. Once an order is placed, it is considered final and sent straight into production. Most pieces ship within 1–2 business days.
We use a rush courier service for all deliveries. Shipping typically takes 3–5 business days, though this may extend slightly during peak seasons. You’ll receive tracking details as soon as your order leaves our studio.
While courier delays or lost packages are outside of our control, we will always do our best to help resolve any issues and offer replacements where possible.
We ship internationally, with a simple shipping structure:
- $9.95 shipping for orders under $150
- Free shipping for orders $150+
For any questions along the way, we’re here to help.
Shipping Policy
Information on production times, shipping rates, tracking, and delivery.
Open Shipping Policy →
Returns Policy
Learn about our return policies, defective item processes, and how to request assistance.
Open Returns Policy →
shop
Wallpaper Samples
